Effective maintenance tips to keep metal gates new in Singapore
Metal gates and fences are quite essential not only to keep the property protected but also to add beauty to it. As these are first aspects that grab the attention of visitors, it is important to take efforts to keep the metal gates and fences look good for a considerably longer time. This is possible only with proper maintenance. Notably, all fences should be maintained periodically to keep them looking at their best and function properly. The maintenance procedure depends on the type of material that is used for the fence or gate. With the proper care, it is possible to make the metal gates give a timeless and elegant look to your home in Singapore.
Usually, the metal gates are made using steel, wrought iron or any other kind of metal. Do keep in mind that the gates and fencing are susceptible to corrosion and rust as these are installed outdoors. As the metal gates are exposed to heat, wind, dust, and rain for long periods of time, it is common for these materials to rust and corrodes over time. So, it is important to take proper care of them and here are some tips that will help in the maintenance of metal gates from the Metal Fabrication Experts in Singapore.
Take preventive measures to avoid damage to metal gates
Before maintenance, it is recommended that you take preventive measures to keep damage at the bay. As fences and metal gates are prone to rust and corrosion, it is important to use a rust-proof covering or coating on top of the actual material before the installation. If you are planning to handle this task on your own in Singapore, you should any of the following,
- Rust-resistant sealer
- Oil-based paint
While taking this preventive care, it is important that you wear protective gear such as eyewear and rubber gloves. The process includes the application of primers and paints that have a lot of chemicals that might be hazardous to inhale. Also, on exposure to these chemicals, there can be some amount of damage caused to your skin.
Routine rust checks and washing are necessary for metal gates in Singapore
As the fences and metal gates are exposed to extreme weather conditions, there could be rust deposits on it over time. If you spot rust flakes on your fences or metal gates, then it is better to have the same scraped off with the help of a sandpaper or paint scraper. This step has to be performed regularly as it is an important one when it comes to maintaining the metal gates in the perfect condition. It is recommended that a thorough check is done once in a few months to make sure there is no rust formation.
Besides getting rid of rust, it is also recommended that the good metal gates in Singapore are washed and cleaned from time to time. It is important to wash the metal gates using warm water and detergent. After a customary wash, you should wipe it thoroughly with a dry cloth. Do keep in mind that drying is a vital step and it should not be overlooked. It will keep the fence or metal gate look at its best. During the rainy season, you can do this washing and drying procedure once in every week. And, during the other seasons, a wash every fortnight should suffice.
Cleaning the area and replacing spare parts of metal gates in Singapore
When you have fences and metal gates installed at your home, there are chances for stray branches and long grass to grow near these. It is important to clear the grass that grows around the gates and fences regularly. You can leave flowering creepers and climbers to grow over the fences and metal gates but it is vital to avoid plants that have hard roots. The reason is that such plants can interfere with the foundation and hinges and make it unreliable and shaky. Once the metal gates in Singapore become unreliable, it can become weak due to other aspects such as severe weather conditions.
A timely examination of the condition of the metal gates is important. This way, you will be able to spot if there are any missing bolts or fixtures. If you do not replace these on time, then you might compromise the strength of the metal gates and make it ineffective.